Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterWeld & Rust Repair in Orlando, FL
Weld and rust repair on an Orlando gate typically runs $180 to $450 for most jobs, with full hinge or post replacements landing between $500 and $900. It’s the repair you need when corrosion from humidity and salt air has eaten through metal, or when a weld has cracked under the weight of a sagging gate leaf. At Warden Gate Repair Orlando, we fix both problems the same way we handle every Gate Repair job: a named technician, a written price before any work starts, and a 365-Day Done Right Promise behind the repair.
Orlando’s climate is brutal on metal gates. We’re inland enough to get heavy summer humidity, close enough to the coast for salt-laden air to drift over on Atlantic breezes, and wet enough that standing water pools at the base of posts after the daily afternoon thunderstorms roll through from June through September. That combination is exactly what rust wants. If your gate is squealing, sagging, or showing flaking orange-brown patches near the hinges, you’re in the right place. Call us at (321) 465-7089 and we’ll walk through what you’re seeing.
As part of the Threshold Group family, we’ve specialized exclusively in gates since 2008. We don’t do gutters, we don’t do drywall. We weld gate frames, we cut out rusted sections, and we know what a Florida gate needs to survive the next decade of afternoon downpours. Our home base is right here in Orlando, so when a weld fails on a Sunday evening because a limb fell during a storm, we can actually get to you.
When You Need Weld & Rust Repair
Not every gate problem calls for a weld. Here’s what tells us you do:
- Sagging gate leaf that drags on the driveway. Over time, hinges pull away from the post. The gate’s whole weight then hangs on a thinner and thinner amount of metal, until the weld finally cracks and the leaf drops. You’ll hear scraping or see fresh grooves in the concrete.
- Visible rust blisters or flaking metal. Rust under paint looks like bubbles or cracks in the surface. Once the paint is broken, moisture gets underneath and accelerates the damage. In neighborhoods like Conway and Belle Isle where sprinklers hit gates every morning, we see this constantly.
- Cracked or broken hinge welds. If you can wiggle your gate and see movement at the hinge plate instead of at the post, a weld has likely failed. This is a safety issue if left alone, because the whole gate can drop without warning.
- Rusted-through bottom rail or pickets. Water pools at the bottom of the gate frame. Once the bottom rail rusts through, the gate loses its structural box, and the leaf starts twisting. This is common on older steel gates in Winter Park and College Park.
- Gate won’t close or align with the opener anymore. Sometimes the opener works fine, but the gate has shifted because a weld gave way. Realigning a sagging gate almost always requires a weld repair, not just an opener adjustment.
- Fresh metal showing at stress points after a storm. Debris hits, the gate flexes, and a crack opens at the weakest point. If you can see bright metal at a joint, call before moisture and rust turn a quick weld into a full-section replacement.
Our Weld & Rust Repair Process
Here’s how a weld or rust repair goes when you call Warden Gate Repair Orlando:
- Call us at (321) 465-7089. A live person answers. Not a voicemail, not a bot. We ask about what the gate is doing, the size and style, and what you’re seeing.
- You get a name and a photo before we arrive. This is our Threshold Standard, and it’s not optional. The technician coming to your door is background-checked, identity-verified, and photo-badged. You know who’s coming and what they look like before they pull into your driveway.
- We inspect and give you a written price. Before any tool touches the gate, you get the price in writing. No estimating games, no “well, we’ll see once we open it up” surprises at the end. Rotted sections, broken welds, hinge replacement: you see the number first.
- We grind, cut, weld, and treat. For rust, we grind back to clean metal, cut out what’s too far gone, weld in new steel where needed, then treat and seal the repaired area. For welds, we clean the joint, grind the crack, and lay a proper weld with correct penetration, not a cosmetic tack job.
- We test the gate under real use. The gate swings or slides through full cycles, with the opener connected if you have one. If the repair shifts alignment, we correct it before we leave.
- You get the 365-Day Done Right Promise in writing. If our weld or rust repair fails within a year, we return and make it right at no cost. The return visit is part of every job, not an extra you have to buy.
Weld & Rust Repair Pricing in Orlando
Here’s what gate repair costs in Orlando, based on the weld and rust work we quote and complete most often:
- Small weld repair (single cracked hinge or joint): $180 – $280
- Rust treatment on a section (grind, treat, seal): $150 – $300
- Rusted section cut-out and steel patch welded in: $250 – $450
- Full hinge replacement (both hinges, welded): $400 – $700
- Bottom rail rebuild (rusted-through): $450 – $900
What changes the price most is how far the rust has spread. Surface rust that hasn’t thinned the metal is cheap to stop. Rust that’s eaten through a rail means cutting and fabricating new steel. A cracked weld on a flat, accessible hinge is a quick job. A cracked weld on a heavy sliding gate with the opener in the way takes longer, and you pay for that time.
These are honest ranges, not bait numbers. The written quote you get before work starts is the exact price you pay. No surprise line items at the end. If we find additional rust during the repair, we stop and show you before touching anything new. Call (321) 465-7089 for a free estimate on your weld or rust repair in Orlando.
Why Orlando Gates Rust Faster Than You Expect
People are surprised at how fast a gate rusts here, because Orlando doesn’t sit right on the ocean. But the recipe is still there. High humidity eight months of the year means metal almost never fully dries after a rain. Summer thunderstorms roll through nearly every afternoon, and the water doesn’t just bead off; it seeps into any crack in the paint, works into the hinge joints, and pools inside the bottom rail. Add in the fact that many Orlando irrigation systems overspray onto gate posts and frames, and you’ve got a steady supply of moisture on the metal even when it hasn’t rained.
What we see in neighborhoods like Audubon Park and Thornton Park is rust that starts at the base of the post and travels upward. In lakefront areas like Conway, the ambient moisture from the water keeps surfaces damp longer overnight. The fix isn’t just welding or patching. It’s also about proper treatment after the metal work, so the repair outlasts what caused the problem in the first place.
Brands We Weld and Repair Around
Weld and rust work isn’t brand-specific, because steel is steel once it’s on a welding table. But gate realignment and the surrounding hardware matter. We service gates with openers from LiftMaster, FAAC, and BFT, and our factory training means we understand how the opener mounts and how the gate frame needs to be aligned after a weld. Our techs also work on Linear systems regularly across Orlando. So whether your gate is a sliding LiftMaster-equipped steel gate in Baldwin Park or a swing gate with a FAAC operator in Dr. Phillips, the person we send knows the whole system, not just the weld.
We don’t claim to service brands outside our training. If your opener is something we don’t work on, we’ll tell you before you pay for anything.
FAQs – Weld & Rust Repair
How much does weld repair cost on a gate in Orlando?
Weld repair on an Orlando gate typically costs between $180 and $450 for most jobs, with full hinge replacements or bottom rail rebuilds running $400 to $900. The exact price depends on how far the damage has spread. You’ll get a written price before any work starts, so there are no surprises. Call (321) 465-7089 for a free estimate on your specific gate.
Can you fix a rusted gate or does it need replacing?
Most rusted gates can be repaired, not replaced, as long as the structural frame still has solid steel to weld to. We grind back to clean metal, cut out sections that are too thin, weld in new steel, and treat the repaired area to slow future rust. Replacement only makes sense when the frame is rusted through in multiple places and the steel has lost its structural integrity. We’ll tell you honestly which path is cheaper in the long run.
How long does a weld repair last on a gate?
A properly done weld repair on a gate should last the life of the gate, because a good weld is as strong as or stronger than the original metal around it. That’s why our repairs are covered by the 365-Day Done Right Promise. If our weld fails within the first year, the return visit and repair are free, in writing, every time.
Can you come today for a gate weld repair in Orlando?
We answer the phone 24/7 for automatic gate repair, and we do our best to schedule same-day service for urgent weld failures in Orlando. A gate that’s sagging on a cracked hinge can drop completely, so we treat it as a priority. Call (321) 465-7089 and we’ll tell you honestly when a technician can be at your door, and send the name and photo of that technician before they arrive.
Call Warden Gate Repair Orlando
If your gate is sagging, squealing, or showing rust that’s moving faster than you’d like, call us at (321) 465-7089. You’ll talk to a real person, you’ll get a straight answer on what we think is going on, and we can send a background-checked, photo-badged technician whose name you’ll know before they arrive. Our Gate Repair in Orlando service line is answered around the clock, and every weld and rust repair comes with a written price and the 365-Day Done Right Promise. We’d rather show you than promise you.
Written by Cole Rafferty, Owner at Warden Gate Repair Orlando, serving Orlando.