Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Conway
Gate repair in Conway usually means one of two things: a sliding gate that’s jumped its track on a long driveway, or a wrought iron gate that’s sagging after years of humid, salty air. We handle both daily. Warden Gate Repair Orlando serves Conway with factory-trained techs who know the difference between a 1960s chain-link frame worth saving and a post that’s finally given up. You get a written price before any work starts, a technician’s name and photo before they arrive, and a 365-Day Done Right Promise on every repair. Call (321) 465-7089 and a live person answers, day or night.
Why Warden Gate Repair Orlando Is Conway’s Preferred Gate Repair Company
Conway homeowners tend to think carefully before opening their driveway to a stranger. We respect that. Every tech we send is background-checked, identity-verified, and photo-badged under what we call the Threshold Standard. You see the name and face before the van pulls up, and the tech shows a photo ID at the door. No mystery visitors, no vague estimates. Cole Rafferty leads our Orlando team, and he holds every Conway job to one rule: the written price is the price, and if the repair isn’t right, the return visit is free. That’s the 365-Day Done Right Promise, and it’s in writing on every invoice.
We answer the phone with a live person 24/7. Not a voicemail, not a chatbot. When a gate controller dies during a summer thunderstorm and your car is trapped in the driveway, that matters. Our Gate Repair team carries parts for LiftMaster, FAAC, Elite, and Mighty Mule on the truck, so most Conway calls get fixed in a single visit. Scheduling is coordinated through our South Florida office, but the crews serving Conway are local and know the roads, the soil, and the gate styles out here.
Styles & brands we work with
Sliding Gate Repair in Conway
Sliding gate repair in Conway often comes down to four things: a bent track, a worn roller, a chain that’s stretched past adjustment, or a motor that’s been hit by a power surge. Long driveways off Hoffner Avenue, Conway Road, and around Lake Conway mean wider gate spans and heavier panels, which put real stress on rollers and tracks. A typical sliding gate repair in Conway runs $180 – $340 for roller and track work, and $320 – $650 when the operator motor or control board needs replacement. We quote the exact number before we touch a wrench.
Track and Roller Replacement
When a sliding gate starts grinding or jerking, the rollers are usually the culprit. Sandy soil from Conway’s well-drained lots works its way into roller bearings, grinding them down over time. We pull the gate, replace the rollers and any bent track sections, and realign the panel so it glides without binding. Most track and roller jobs are done in under two hours.
Solar-Powered Slide Operators
Many Conway properties have gates set far from the house, where running line voltage means trenching hundreds of feet. Solar operators solve that, but they need clean panels and healthy batteries. After a hurricane blows debris and shade across a panel array, the battery drains and the gate sticks half-open. We service and repair solar slide operators from LiftMaster and Mighty Mule, including panel repositioning and battery replacement.
Wrought Iron Gate Repair in Conway
Wrought iron gate repair in Conway typically involves welding cracked frame joints, replacing rusted hinges, or straightening a panel that’s sagging after years of humid air and storm stress. Conway’s subtropical climate accelerates corrosion on iron, especially at the base of hinge posts where water pools. A hinge and bracket repair on a wrought iron gate in Conway runs $150 – $300, while a full panel realignment with new weld joints runs $250 – $475. We always show you the weld points before we start.
Rust Repair and Reinforcement
Conway’s salty, humid air eats wrought iron from the bottom up. We grind out rust pockets, weld in new steel where the original has thinned, and reinforce the stress points at hinges and latch plates. The goal is to make the gate stronger than the day it was hung, not just patch it until next year. After welding, we prime and paint to match, so the repair blends with the existing finish.
Hinge and Post Stabilization
A sagging wrought iron gate is usually a hinge problem, not a panel problem. The top hinge stretches and the gate drops, binding on the latch side. We replace worn hinges with heavy-duty greasable bearings and check the post for movement. If the post has shifted in sandy soil, we reset or reinforce it so the gate hangs square and swings freely.
Trusted Brands We Service in Conway
We’re factory-trained on nine major gate and opener brands, and for Conway customers that usually means LiftMaster, FAAC, Elite, and Mighty Mule. LiftMaster and FAAC dominate the automatic opener market in Conway, while Mighty Mule shows up a lot on rural properties and solar setups. We stock common circuit boards, remotes, safety sensors, and rollers for these brands locally, so most repairs don’t wait on a parts shipment. If you’re not sure what brand is on your gate, call us and we’ll identify it from a photo before we even schedule the visit.
Common Gate Repair Problems We See in Conway Homes
- Hinge posts corroding through at the base. Decades of humid, salty air eat the steel right where it meets the concrete. The gate drops, binds on the latch side, and eventually won’t close at all. We weld new brackets onto the still-solid post to avoid a full footing replacement.
- Operator boards fried by summer lightning. Conway’s afternoon thunderstorms send surges through gate control boards, especially on openers wired directly to the house panel. Symptoms include dead keypads, unresponsive remotes, and a gate that only works in manual mode.
- Sagging panels after hurricane winds. High winds flex the gate panel and stretch the hinges. The gate still works, but it scrapes the ground and strains the motor. We realign the panel and replace the stretched hardware before the motor burns out.
- Solar panels shaded by post-hurricane debris. A solar gate operator with a partially shaded panel drains its battery in a few days. The gate stalls half-open, which is a security problem on a rural Conway driveway. We clear the obstruction, reposition the panel for full sun, and test the battery under load.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Conway, FL
Gate repair in Conway runs $150 – $475 for most hinge, bracket, and realignment work, and $320 – $650 when an opener motor or control board is involved. Solar upgrades and retrofits on long driveways run higher, usually $700 – $1,200 depending on panel count and battery capacity. Factors that shift the price: gate width, whether we need a lift to remove a heavy panel, and whether the post itself needs resetting in sandy soil. We give you a written price before any work starts, and that price doesn’t grow at the end of the job. Call (321) 465-7089 for a free estimate on your specific gate.
We Also Serve Cities Near Conway
Our crews working in Conway also cover Orlando, Kissimmee, Ocoee, and Clermont. If your gate is on the edge of Conway or just over the line in one of these nearby cities, call us anyway. We schedule by location, not by zip code boundaries, and the same written-price policy applies everywhere we work.
Serving Conway, FL - Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Conway
In most Conway homes we service, the answer is yes, you can retrofit. Those old steel posts were set in concrete that’s often still rock-solid, even when the hinges and latches are rusted through. We cut out the corroded hardware, weld new heavy-duty brackets onto the existing posts, and pair the frame with a modern automatic opener from LiftMaster or FAAC. You skip the cost of new footings and a new frame, which can save $600 – $1,000 compared to a full replacement. Call (321) 465-7089 and we can tell you from photos whether your posts are worth saving.
About 70% of the sagging gates we see in Conway are hinge failures, not panel or post failures. The top hinge stretches under the wind load, the gate drops, and the latch side binds. We check the post for movement first, then replace the hinges with heavy-duty greasable bearings. If the post has shifted in the sandy soil, we reset it. Either way, you’ll know exactly what failed before we quote the repair.
Yes, wider gates need operators with more torque, and if the gate is far from house power, you’ll want a solar-capable model. We install and service heavy-duty slide operators from LiftMaster and FAAC designed for gates up to 1,000 pounds and 40 feet wide. For long Conway driveways without line voltage, we configure the operator with a properly sized solar panel and battery bank so it runs through cloudy stretches and short winter days. Call (321) 465-7089 for a free on-site measure and written quote.
Solar gate openers work well in Conway’s climate, but they need maintenance after storms. The intense summer sun charges batteries fast, but hurricane debris and tree shade can starve the panels and drain the system. We include panel positioning and battery testing in every solar opener repair, and we recommend a panel tilt that sheds rain and resists wind lift. If your solar gate quit after the last storm, it’s usually shade, a loose connection, or a battery that’s past its life.
A nearby lightning strike likely sent a surge through your gate’s control board, which can fry the keypad circuit while leaving the motor intact. This is one of the most common storm-related calls we get in Conway. We test the board, replace it if needed, and often add a surge protector to prevent a repeat. Repairs like this run $200 – $450 depending on the brand and board. Call (321) 465-7089 for an exact quote, and we can usually get a tech to you the same day.
Call Warden Gate Repair Orlando for Gate Repair in Conway
If your gate is sagging, stuck, or dead after a storm, call (321) 465-7089. You’ll speak to a live person, get a free estimate, and receive a written price before any work starts. We’ll send you the technician’s name and photo before they arrive, and every repair is covered by the 365-Day Done Right Promise. Serving Conway, FL with same-day service for gate emergencies and honest, upfront pricing on every job.
Written by Cole Rafferty, Owner at Warden Gate Repair Orlando, serving Conway, FL.