Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The Orlando Owner’s Guide

Ghost Controls keypad and intercom repair in Orlando typically runs $185 to $420 installed, depending on whether we’re fixing the existing unit or swapping in a new one. We stock Ghost Controls-compatible keypads and intercom modules on the truck, so most repairs in Orlando finish the same day we arrive. You usually discover the problem the hard way: the keypad stops lighting up, the intercom crackles when a delivery driver buzzes, or the gate simply won’t open from outside even though the remote works fine from inside your car.

Call (321) 465-7089

Here’s the symptom picture we hear most from Orlando homeowners: the keypad beeps but the gate doesn’t move, or the intercom voice is so garbled you can’t understand a word. Sometimes it’s water intrusion from a Florida downpour. Sometimes it’s the wiring between the keypad and the gate motor (the box that slides or swings your gate automatically). Either way, if you’re locked out of your own gate, you need a tech who actually carries Ghost Controls parts, not someone who’ll order blind and leave you waiting a week.

Key Takeaways:

• Most Ghost Controls keypad repairs in Orlando run $185 – $420, parts and labor included.
• We’re an independent Orlando gate repair company, not affiliated with Ghost Controls, but we’re factory-trained on their gear.
• Written price before any work starts. Always.
• Most keypad and intercom swaps take under 90 minutes once we’re on site.

Which Ghost Controls Models This Applies To

We work on the full Ghost Controls residential line: the AXP Series, the R series, and the newer Ghost Pro models with the backlit keypad and two-way intercom. If your opener was installed in the last decade in an Orlando neighborhood like Baldwin Park, Conway, or Dr. Phillips, there’s a good chance it’s one of these. Ghost Controls changed their keypad connector style around 2019, so older keypads won’t always plug into newer control boards without a small adapter, and that’s exactly the kind of thing that trips up a generic repair guy.

When you call us, we’ll ask you to read off the model number from the side of the control box, usually starting with “AXP” or “R36” or similar. That number tells us exactly which keypad firmware and which intercom module your system needs. For Ghost Controls gear specifically, we recommend OEM parts over aftermarket knockoffs: the aftermarket keypads we’ve seen fail within a single Orlando rainy season because the membrane gaskets don’t seal the same way the factory units do. We do carry a few quality aftermarket equivalents for older discontinued Ghost Controls keypads, but we’ll tell you straight which one we’d put on our own gate.

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

• Keypad lights up but gate won’t move: This usually means the keypad itself is fine but the relay or output wire to the gate motor has failed, or the control board isn’t reading the signal. We’ve seen corroded wire nuts inside the keypad housing cause this more than anything else in Orlando’s humidity.
• Intercom crackles or drops out mid-sentence: This is almost always a failing speaker diaphragm or a corroded solder joint where the intercom wire connects to the master station. Florida’s moisture plus Ghost Controls’ thin gauge wiring is a rough combination.
• Buttons require multiple hard presses: The membrane is worn or grit has worked its way under the faceplate. Once one button starts going, the others follow within weeks because the gasket seal has been compromised.
• Gate opens on its own or won’t close fully: Weird as it sounds, a shorted keypad wire can send phantom signals to the opener. This is more common after heavy rain or when landscaping crews nick the low-voltage line.
• Keypad works but intercom is dead silent: Ghost Controls intercoms run on a separate power leg. If the intercom speaker fails, the keypad often keeps working, which convinces people the whole system is fine until a guest shows up and nobody can hear them.

Replacement Cost & What’s Included

In Orlando, expect to pay $185 to $420 for a complete Ghost Controls keypad or intercom repair, with most jobs landing around $260. The lower end covers a straightforward OEM keypad swap on a newer AXP system. The higher end includes intercom module replacement plus rewiring or a new transformer if the power supply got soaked. You’ll get a written price before any work starts, and if that written price changes for any reason, we stop and call you first – no surprise line items at the end.

Every Ghost Controls keypad or intercom repair we do is backed by our 365-Day Done Right Promise: if the repair isn’t right, we make it right, with a free second visit included. We’re led by Cole Rafferty, who’s been running gate service calls across Central Florida for over two decades and knows which Ghost Controls parts hold up in this climate and which ones don’t. Our techs are background-checked, identity-verified, photo-badged, and sent to you by name and photo before arrival – that’s the Threshold Standard, and it’s enforced on every visit.

DIY or Call Us?

Here’s the honest split. You can safely check a few things yourself: the keypad faceplate for cracks, the wire connections at the keypad housing, and whether the breaker or GFCI that feeds the gate opener has tripped. But beyond that, I’d tell you to stop, because Ghost Controls systems run low-voltage (usually 12-24V DC) but the control board inside the gate motor carries line voltage from your panel, and the wrong poke in the wrong spot crosses the streams. That’s not a burned fingertip, that’s a dead board plus a service call that just doubled.

Also worth knowing: Ghost Controls keypads and intercoms can look simple but the programming sequence is keyed to your specific opener model, and entering the wrong code sequence can lock out the whole system. We carry the factory manuals, the adapters, and the parts on the truck, so we don’t need to take a picture, drive back to a warehouse, and “try a few things.” Call (321) 465-7089 and we’ll give you a straight read on whether it’s worth fixing or replacing. You’ll know the price before I touch anything.

FAQs