A Warden company - serving Orlando, FL

Before & After Gallery - Warden Gate Repair Orlando

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Repair Before & After in Orlando, FL

Most gate repair companies talk about what they *can* do. We’d rather show you what we’ve already done. The photos below are from real jobs around Orlando: sagging gates, dead motors, panels that wouldn’t close, openers that quit on the hottest afternoon of July. You’ll see the condition the gate arrived in, what we found once we opened it up, and how it looked when we left. A gate is only as good as the repair behind it, so this page exists to show you ours.

Call (321) 465-7089

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Recent Transformations

Sliding Gate Motor Replacement in Lake Nona

Before and after: sliding gate motor replacement in Lake Nona, Orlando by Warden Gate Repair
Sliding gate motor replacement, Lake Nona. The old Linear motor had burned out after years of fighting a rusted chain. We installed a new Linear actuator, replaced the chain and sprockets, and reset the travel limits.

The homeowner’s gate had been creeping slower for weeks until it finally stopped about two feet short of closing. The problem was the chain, not the motor. Years of Florida humidity had rusted the links, and the extra drag had cooked the old actuator. We replaced the chain and sprockets, installed the new motor (the box that slides the gate back and forth), and adjusted the safety edges so the gate reverses properly if a car or a kid crosses its path. Total repair took one afternoon, and the gate now closes fully and quietly.

Bent Gate Panel Straightening in Winter Park

Before and after: bent gate panel straightened and repainted in Winter Park, Orlando by Warden Gate Repair
Bent gate panel repair, Winter Park. A delivery truck clipped the corner of this swing gate. We removed the bowed section, straightened the steel, reinforced the frame, and touched up the paint.

This one came in as an emergency call at 6 a.m. A box truck had caught the edge of a double swing gate and bent the corner panel outward, leaving the gate unable to latch. We pulled the damaged section, worked the steel back to true, and added a reinforcement bar so the repair wouldn’t become a weak point. The gate closed and latched by noon, and the paint match was close enough that the owner said he couldn’t tell where the damage had been.

Ghost Controls Opener Wiring Repair in Dr. Phillips

Before and after: Ghost Controls opener wiring repair in Dr. Phillips, Orlando by Warden Gate Repair
Ghost Controls opener wiring repair, Dr. Phillips. Rodents had chewed through the low-voltage control wire where it passed through the fence. We reran the line in conduit and restored full remote function.

The gate had been working fine the night before, then wouldn’t respond to the remote at all the next morning. We traced the control wire and found a nest about eight feet from the gate, with the wire chewed clean through. We replaced the damaged section, ran the new line through sealed conduit so it can’t happen again, and verified the photo-eye sensors and the keypad were all talking to the opener. The gate has been opening on command ever since.

Hydraulic Gate Actuator Rebuild in Baldwin Park

Before and after: hydraulic gate actuator rebuild in Baldwin Park, Orlando by Warden Gate Repair
Hydraulic actuator rebuild, Baldwin Park. This FAAC hydraulic swing arm was leaking fluid and moving unevenly. We rebuilt the cylinder, replaced the seals and hoses, and bled the system.

A slow leak, you don’t notice until the gate starts moving in jerks or leaving a stain on the driveway. This FAAC swing arm had lost enough fluid that the gate would stall halfway open, then slam shut once pressure built back up. We rebuilt the actuator with new seals and hoses, refilled and bled the system, and adjusted the closing speed. The gate now swings open in one smooth motion and holds steady at the open position.

Solar Gate Opener Battery and Panel Replacement in Windermere

Before and after: solar gate opener battery and panel replacement in Windermere, Orlando by Warden Gate Repair
Solar opener battery and panel replacement, Windermere. The old Mighty Mule battery wouldn’t hold a charge, and the solar panel was shaded by new landscaping. We repositioned the panel and upgraded the battery.

This gate worked on sunny days and went dead every time it rained for two days straight. The battery was five years old and no longer holding a charge, and the solar panel had been shaded out by a line of new palmettos. We replaced the battery with a higher-capacity unit, moved the panel to a spot that gets full sun until late afternoon, and sealed every connection against moisture. The gate now works through a week of Orlando rain without complaint.

Gate Track Replacement in College Park

Before and after: sliding gate track replacement in College Park, Orlando by Warden Gate Repair
Sliding gate track replacement, College Park. The original steel track had rusted through near the gate post, and the rollers had worn flat. We replaced the track, rollers, and guide wheels.

If you’ve ever pushed a sliding gate that feels like it’s dragging through gravel, you know what this was. The track had rusted through in one spot, and the gate would jerk hard every time the rollers hit the gap. We cut out the old track, set a new one in concrete, and replaced the seized rollers and the guide wheels that keep the gate upright. It rolls open with two fingers now.

Want Results Like These?

Every repair we do comes with a written price before any work starts, and the 365-Day Done Right Promise: if the repair fails, we return free. Call (321) 465-7089 and a live person answers, 24 hours a day. Your technician’s name and photo arrive before we do, and the quote is on paper before a tool comes out. That’s the whole point of a warden: someone who watches over things, so you don’t have to.

Written by Cole Rafferty, Owner at Warden Gate Repair Orlando, serving Orlando since 2008.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need Gate Repair help in Orlando? Licensed & insured · 1-hour response · free estimates
Call (321) 465-7089
Local Service Coverage

Request a Free Estimate in Orlando

Tell us what you need - Warden Gate Repair Orlando responds fast. No obligation.

When you submit this form, you agree to our Privacy Policy and agree to be contacted by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch