Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Orlando, FL
Gate repair in Orlando means working fast on equipment that’s been fighting humidity, lightning, and shifting sandy soil since the day it was installed. Most of our Orlando jobs sit inside HOA-governed communities where a dead gate motor or a sagging weld is a compliance problem with a deadline, not a cosmetic issue. Cole Rafferty runs our Orlando gate team, and when you call (321) 465-7089, you’ll get a real person who can schedule a technician by name, with a written price before the work starts. This page covers what makes Orlando gate work different, local pricing, and the neighborhoods we cover. The three services we offer each have their own Orlando page linked just below.
Why Orlando Homes Are Different
Orlando’s gate problems follow a pattern we don’t see in drier parts of Florida. The humid subtropical climate means afternoon thunderstorms roll through most days from June through September. Water finds its way into gate operator housings, and lightning takes out control boards. We regularly replace circuit boards on LiftMaster and FAAC openers in Baldwin Park and College Park after summer storm cells. Then there’s the soil. Central Florida’s sandy, well-drained ground shifts after heavy rain, which tilts gate posts and throws slide gates out of alignment. Homes in newer master-planned communities like Lake Nona tend to have newer aluminum gates, but the 1980s and 1990s subdivisions around Conway and Pine Hills are full of steel and wrought-iron gates that have been rusting in high humidity for decades. Add hurricane season, when wind gusts stress hinges and welds, and Orlando gate work becomes its own specialty. Many HOAs here require a failed community gate to be operational within 24 to 48 hours, which means our Orlando trucks carry common circuit boards, remotes, and photo-eye sensors so we aren’t waiting on a distributor when a community gate goes down.
Styles & brands we work with
Our Main Orlando Services
Most Orlando homeowners call us for one of two reasons: a gate that won’t open, or a gate motor that opens on its own, grinds, or stops halfway. Each has its own Orlando page with full detail and pricing.
Gate Repair in Orlando
When a steel gate won’t swing or slide in Orlando, the cause is usually rusted hinges, a bent track, or a post that shifted after a heavy rain. We pull the gate off when needed, weld or replace the failed section, and re-set hardware so the gate moves cleanly. On wrought-iron gates in neighborhoods like Thornton Park, salt air and constant moisture mean we see rust-through at the bottom rail and hinge plates more than anywhere else in Central Florida. Read the full scope on our Gate Repair in Orlando page.
Electric Gate Repair in Orlando
An electric gate that stops responding in Orlando is typically dealing with water intrusion in the operator housing, a lightning-damaged control board, or a photo-eye knocked out of alignment by wind and debris. When a community entrance gate fails, HOA pressure is immediate, and our techs understand that. We diagnose the whole low-voltage system, not just the part that sparked. Full detail is on the Electric Gate Repair in Orlando page, including what to check before you call.
Gate Motor Repair in Orlando
The gate motor, the box that slides or swings your gate automatically, takes the brunt of Orlando’s weather. UV breaks down plastic limit-switch housings over time. Flooding in the operator pit kills the motor itself. We service motors from LiftMaster, FAAC, BFT, and Linear, and we stock the most common Orlando replacement boards locally so a motor job often finishes same-day. See pricing and failure patterns on the Gate Motor Repair in Orlando page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Orlando
Our Orlando technicians are factory-trained on LiftMaster, FAAC, BFT, and Linear, the four brands we see most in local communities and HOA gates. We keep common control boards, remotes, and photo-eyes for these brands on our Orlando trucks, which means less waiting on distributors. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Orlando, FL
These are typical Orlando ranges. We give you a written price before any work starts, and that price doesn’t change unless you approve a change first.
| Service | Typical range in Orlando |
|---|---|
| Gate troubleshooting and diagnosis | $85 – $150 |
| Gate hinge replacement | $180 – $375 |
| Gate wheel or roller replacement | $140 – $320 |
| Weld repair on steel or wrought-iron gate | $150 – $450 |
| Slide gate track realignment | $200 – $500 |
| Gate motor replacement (operator unit only) | $650 – $1,600 |
| Control board replacement | $225 – $525 |
| Gate opener remote programming | $75 – $125 |
| Photo-eye sensor replacement | $120 – $260 |
| Complete gate opener installation | $1,200 – $3,200 |
The biggest price drivers in Orlando are rust damage that extends into the gate frame, storm or lightning damage to control boards, and HOA-mandated upgrades to meet current safety codes. You’ll always know the full cost upfront, in writing, before the first part comes off your gate.
Neighborhoods We Serve in Orlando
We run gate repair calls across the entire Orlando metro every day. Same-day and next-day windows are generally available, and our techs are dispatched from the Orlando metro office.
- Baldwin Park
- College Park
- Lake Nona
- Conway
- Pine Hills
Service Area – Cities Near Orlando
Beyond Orlando proper, our gate repair crews regularly work the surrounding Central Florida cities. We cover Ocoee, FL to the west, Winter Garden, FL just beyond that, Kissimmee, FL to the south, and Minneola, FL up toward Lake County. If you’re in one of these areas, call and we’ll tell you exactly when a tech can be there.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Orlando
Usually, yes. We hold same-day slots for Orlando gate failures every weekday, and our trucks stock common circuit boards, remotes, and photo-eyes for LiftMaster, FAAC, BFT, and Linear. Call (321) 465-7089 and we’ll tell you when a named technician can arrive.
We do. Many Orlando HOAs mandate repair within 24 to 48 hours of failure, and we’re familiar with that urgency. We diagnose, quote in writing, and often complete the fix the same visit so the HOA deadline is met.
Nothing. You’ll receive a written price before any work starts, and that’s the price you pay unless you approve a change. Estimates are free, so call (321) 465-7089 and we’ll quote your exact job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Orlando Customers Say
"Remotes were out of range. He replaced the antenna and re-paired the remotes. Works from the street now."
- Valerie T."Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K.