Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterGate Realignment in Orlando, FL
Gate realignment in Orlando typically costs between $150 and $400 for a standard single-swing or slide gate, with most jobs completed the same day we arrive. Realignment is the fix for a gate that has drifted out of square – it drags on the ground, the latch no longer lines up, or the hinges have sagged under years of Florida heat and rain. At Warden Gate Repair Orlando, we handle realignment as a focused repair, not an upsell, and you’ll know the exact price in writing before we touch a single bolt. Call (321) 465-7089 and we’ll talk through what your gate is doing.
Realignment matters in Orlando because our soil shifts. The sandy, moisture-heavy ground across Orange County expands and contracts through wet summers and dry winters, and gate posts set in that soil slowly lean. A gate that was perfectly square in 2019 can be dragging on the pavers by 2026. If you need a broader look at what your gate system may need, our Gate Repair page covers the full range of services we offer.
When You Need Gate Realignment
You’ll usually notice the problem before you can name it. Here’s what gate realignment looks like in practice across Orlando:
- The gate scrapes or digs into the driveway. As hinges and posts settle, the gate’s free end drops. In College Park and Winter Park, where older homes sit on decades-old concrete pads, we see gates wearing shallow grooves into the slab from months of dragging.
- The latch misses the receiver. If you have to lift or shove the gate to get the lock to engage, the geometry has shifted. This is a security issue more than a convenience one.
- The gate swings open or closed on its own. A gate out of level will drift toward the low side. That’s not a ghost – it’s a misaligned post or hinge that gravity has taken over.
- You hear creaking or grinding during travel. Misalignment forces the gate motor to work against uneven resistance. Over time that strain kills motors, especially on slide-gate systems where a dragging wheel loads the gearbox harder than it was designed for.
- Visible gaps at the top or bottom hinge. When the gap at the top hinge is wider than the bottom gap, the gate has sagged and the hinge bearings are taking the load. Leaving it alone turns a $200 realignment into a $900 hinge-and-post job.
Our Gate Realignment Process
Here’s how we handle a realignment call in Orlando, step by step. The sequence rarely changes because it works.
- We confirm the problem over the phone. You describe what the gate is doing – dragging, drifting, latch not catching. We ask about the gate type (swing or slide), the opener brand (LiftMaster, FAAC, BFT – whatever is on the motor), and when the issue started. This gives us a working theory before we arrive.
- Your technician arrives by name, with a photo sent ahead. You get the technician’s name and photo before the visit, and they show a photo ID badge at the door. That’s the Threshold Standard, and it applies to every Warden visit – no exceptions.
- We measure and diagnose. The tech checks post plumb, hinge wear, gate level, latch alignment, and opener travel limits. We measure the actual gap differences and show you what we found, in plain terms.
- You receive a written price. Before any work begins, you get the cost on paper. That number doesn’t change unless you approve additional work in writing. No surprise line items at the end.
- We realign and test. Depending on the diagnosis, that may mean shimming or re-setting hinges, adjusting the post with a wedge, re-leveling the gate frame, or re-tuning the opener’s open and close limits after the realignment. On FAAC and LiftMaster slide-gate systems, we also check the drive chain tension after realignment since a shifted gate changes the track geometry.
- You get the 365-Day Done Right Promise in writing. If the repair isn’t right, we come back and make it right – free. That’s the deal on every gate realignment we do.
Gate Realignment Pricing in Orlando
Gate realignment in Orlando runs from about $150 to $400 for most residential gates. The final number depends on what we find:
- Hinge adjustment and re-level: $150 – $250. Common on single swing gates under 12 feet long. The hinges are re-set, the gate is brought back to level, and the latch is re-aligned.
- Slide gate track and roller realignment: $200 – $350. Includes re-seating the rollers, adjusting the track mount points, and re-tuning the opener limits on BFT, FAAC, or Linear systems.
- Post re-setting or wedge shimming: $250 – $400. When the post itself has leaned in Orlando’s shifting soil, we correct the post without a full replacement – when the post is still structurally sound.
- Opener limit re-tuning (standalone or after realignment): $75 – $125. The opener’s open and close stops must be reset any time the gate’s resting position changes. Skipping this step causes future realignment problems.
What affects your price: gate length and weight, how far out of alignment it is, single vs. double gate, and whether the hinges or rollers need replacement as part of the job. We’ll tell you all of this before you pay a dollar. Estimates are free – call (321) 465-7089 for an exact quote on your gate.
FAQs – Gate Realignment
How much does gate realignment cost in Orlando, FL?
Gate realignment in Orlando costs $150 to $400 for most residential gates, with the price depending on gate type, weight, and how far out of alignment it has drifted. The written price is given before any work starts, every time. Call (321) 465-7089 for a free estimate on your specific gate.
Can you fix my gate the same day?
Yes – most gate realignment jobs in Orlando are completed the same visit, typically in under two hours. We carry the common hinge, roller, and shim hardware on the truck, and live phone coverage is available 24/7 if your gate has become a security problem.
Is it cheaper to realign a gate or replace it?
Realignment is almost always cheaper, usually $150 to $400, versus $800 to $2,500 or more for a full gate and opener replacement. We’ll only recommend replacement if the post is rotted, the frame is cracked, or the hinges have destroyed the gate’s structural connection – and we’ll show you why with measurements.
Why does my Orlando gate keep coming out of alignment?
In Orlando, repeated realignment problems usually trace to shifting soil, a leaning post, or hinge wear that a simple adjustment won’t fix long-term. Our diagnosis identifies the root cause – not just the symptom – so you aren’t calling us back every six months. And if the realignment fails inside a year, the return visit is free under the 365-Day Done Right Promise.
Do you work on LiftMaster and FAAC gate openers after realignment?
Yes. We’re factory-trained on LiftMaster, FAAC, BFT, and Linear openers, so the realignment and the opener re-tuning happen in one visit. The gate motor has to be re-synced with the gate’s new resting position, or the opener will fight the realignment and undo the work.
Written by Cole Rafferty, Owner at Warden Gate Repair Orlando, serving Orlando.