Ghost Controls Access Control Installation Nationwide

Ghost Controls Access Control Installation: The Orlando Owner’s Guide

Ghost Controls access control installation in Orlando typically runs $425 – $780 installed, depending on which keypad, intercom, or vehicle-sensing module your system needs. We stock Ghost Controls-compatible access control parts on our trucks and complete most installations the same day we arrive. Most Orlando owners discover the problem the hard way: the keypad stops responding after a rainstorm, the exit wand quits sensing the car, or a lightning strike takes out the circuit board and suddenly the gate only opens from inside the house.

Call (321) 465-7089

If you’re standing at a dead keypad or a gate that ignores every command, here’s the page that tells you exactly what failed, what it costs to fix, and how fast we can get it done. Warden Gate Repair Orlando is an independent gate and opener specialist, not a Ghost Controls affiliate, but we’ve installed and repaired their access control line across Central Florida for years. Cole Rafferty has seen which Ghost Controls components hold up in Florida humidity and which ones don’t. That knowledge is in the pricing and the parts-matching below.

Which Ghost Controls Models This Applies To

Ghost Controls builds access control gear for their AXS, DTP1, and DEP2 series gate openers, and the compatibility rules trip up plenty of owners. The biggest gotcha: Ghost Controls changed their keypad and push-button wiring from a 2-wire setup on older boards to a 3-wire setup on their newer AXS series. If you have a pre-2018 Ghost Controls opener with a dark gray control board, you’ll need the older 2-wire compatible keypad or an adapter. If your board is a lighter green AXS board, the current 3-wire Ghost Controls keypads plug in directly.

Identifying your exact unit takes thirty seconds. Open the control box cover. The board has a white sticker with the model number printed on it, usually starting with AXS or DTP. Snap a photo of that sticker before ordering anything, because Ghost Controls has shipped three board revisions that look nearly identical but wire differently. We stock both OEM Ghost Controls keypads and quality aftermarket equivalents that match the correct wiring configuration. For most Orlando homes, the OEM part is worth the extra $40 – $60 because Ghost Controls has a habit of tweaking connector positions mid-production run. Aftermarket units sometimes need a jumper moved or a connector re-pinned, and that’s fifteen minutes of labor that eats the savings.

We also keep Ghost Controls-compatible exit wands, vehicle loop detectors, push-button stations, and wireless keypad mounts on the truck. If your system needs a part outside the Ghost Controls line, we also stock compatible access components for LiftMaster, Mighty Mule, and DoorKing.

Signs Your Ghost Controls Access Control Installation Is Failing

• Keypad lights up but the gate doesn’t move. This usually means the keypad itself is fine but the relay on the control board has burned out, a common failure after Orlando’s afternoon thunderstorms send voltage spikes through poorly grounded systems.
• Keypad works sometimes, usually after pressing hard or multiple times. The membrane on Ghost Controls keypads breaks down under UV exposure. Florida sun is merciless on these. Older keypads get hairline cracks that let rain in, and then the contacts corrode from the inside.
• Exit wand stopped sensing your car entirely. Ghost Controls exit wands fail in two ways: the internal sensor coil burns out from constant power, or the buried cable gets nicked by a lawnmower or edger. We diagnose which one before we price the fix.
• The gate opens on its own at random. This is almost always a failing keypad or a pinched wire, not the opener itself. Humidity gets into a cracked keypad housing and creates phantom contact closures. You’d be surprised how often this happens in Orlando neighborhoods where sprinklers spray toward the gate post.
• Push-button station works but keypad doesn’t, or vice versa. If one access point still works, the control board is usually okay. The problem is isolated to that specific keypad or its low-voltage wire run.

Replacement Cost & What’s Included

Here’s what Ghost Controls access control installation costs in Orlando, installed by a gate specialist:

• Wireless keypad replacement: $425 – $560 installed, depending on whether the unit is wired directly or uses a wireless receiver kit.
• Hardwired keypad swap (AXS series 3-wire): $380 – $475 installed, including programming all existing codes into the new pad.
• Exit wand replacement: $495 – $650 installed, including sensor, new direct-burial cable, and testing with your vehicle.
• Push-button station replacement: $350 – $440 installed.
• Full access control panel upgrade with two keypads: $720 – $780 installed.

The range depends on wire condition, mounting surface (brick and stucco take longer to drill properly than vinyl fence posts), and whether the existing wiring can be reused. You’ll get the written price before we touch anything, line by line. If we find a hidden wiring problem mid-install, we stop and explain what it costs before we proceed. No surprise line items at the end. Every Ghost Controls access control installation includes programming verification, a test of all entry points, and the 365-Day Done Right Promise: if the install fails within a year, the return visit is free.

DIY or Call Us?

You can safely do two things before calling us. First, check the keypad’s battery if yours is the wireless model. Second, check the breaker labeled “gate” or “gate opener” in your electrical panel. About one in five Orlando service calls for “dead keypad” ends up being a tripped GFCI outlet or a breaker someone flipped during a storm. Those two checks cost you nothing.

Beyond that, access control installation is low-voltage electrical work that goes wrong quietly. Ghost Controls boards are picky about which wire goes where, and one reversed connection can fry the board and turn a $400 keypad swap into a full board replacement. If you’re considering wiring a new keypad yourself, know this: Ghost Controls does not sell replacement boards cheaply, and a damaged board is usually a $300 – $400 mistake on top of the original repair. If the keypad is dead, call us at (321) 465-7089. We’ll quote the exact part and labor before anything gets touched, and a trained technician arrives with a photo ID badge and the right part on the truck.

FAQs