Gate Parts & Welding Cost - Honest Price Ranges, Free Written Quote

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Gate Parts & Welding Cost in Orlando?

Gate parts and welding work in Orlando typically runs $165 to $1,400 depending on what failed and whether a welder needs to come out. Small jobs like hinge replacement or a minor weld repair land in the $165 to $390 range. Full gate frame reconstruction, complete motor and control board replacement, or custom steel fabrication can push past $1,200. Most homeowners in Orlando pay between $280 and $550 for a typical gate parts replacement with minor welding included.

Here is what matters: a gate that won’t open or close is a security gap, and Orlando’s humidity means rust moves faster than in most markets. You’ll get an honest written price before we start. That price includes the part, the labor, the weld work if needed, and the trip to your property. No add-ons discovered at the end of the job.

Key Takeaways

• Typical Orlando gate parts and welding job: $280 to $550.
• Minor weld repairs (cracked hinge bracket, broken gate latch, split seam): $165 to $310.
• Full gate motor replacement with new control board: $580 to $1,100, depending on the brand.
• Gate frame welding and structural reinforcement: $390 to $1,400, driven by steel thickness and rust damage.
• Every job includes a written price before we start and a 365-day guarantee on the repair.

Warden Gate Repair Orlando fixes gates, gate motors, and gate frames exclusively. We don’t do general handyman work. We aren’t a fence company that also touches gates. This is all we do, and it’s why we can tell you exactly what a repair should cost in the Orlando market before you commit to anything.

Gate Parts & Welding Cost Breakdown (2026)

Here is what gate parts and welding work actually costs in Orlando in 2026. These are the numbers we quote most weeks across neighborhoods like Baldwin Park, College Park, Conway, and Dr. Phillips.

These ranges reflect what we see across Orlando, from MetroWest to Winter Park to Oviedo. The reason some jobs fall low and others run high comes down to three things: the age of the gate, the thickness of the steel, and whether the original installer used commercial or residential components. A 2008 lift-master swing gate motor on a heavy steel gate in Windermere is a different job than a lightweight aluminum gate in Lake Nona.

If you want an exact number, call (321) 465-7089. The estimate is free, and you get the price in writing before anything happens to your gate.

What Affects Gate Parts & Welding Pricing in Orlando

Here is what moves the price in this market specifically.

• Rust and corrosion. Orlando’s combination of daily humidity, summer downpours, and salt air drifting inland from the coast means steel gates rust faster here than in dry markets. A gate that looks fine on the outside may have internal frame rot. We regularly open up gate frames in neighborhoods like Delaney Park and Audubon Park and find the bottom rail rusted through where sprinkler water has been hitting it for years. Rust repair adds time, and time is labor.
• Gate weight and length. A 20-foot steel driveway gate in Dr. Phillips weighs several hundred pounds more than a 6-foot pedestrian gate in Thornton Park. Heavier gates require stronger hinges, more weld passes, and more reinforcement. That translates directly to material and labor cost.
• Motor brand and age. A new LiftMaster LA400 swing gate motor runs different money than a FAAC 400 or a Viking L-3. Some older motors have discontinued control boards, which means the fix is a full motor replacement, not a $300 board swap. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and the parts cost varies significantly between brands.
• Access to the gate posts. If the gate post is set in concrete that’s cracked and shifting, welding a new bracket won’t fix it. The post has to be dug out and re-set, which adds $180 to $400 depending on access. This happens often in older Orlando neighborhoods like Colonialtown and Lake Como, where the original posts were set shallow in the 1970s or 1980s.
• Weld quality requirements. Some gates just need a tack weld to hold a latch plate. Others need a full structural weld with reinforcement gussets. The difference is the difference between a $200 job and a $600 job, and we’ll show you which one your gate actually needs before the welder touches it.
• Permit or HOA requirements. Some Orlando HOAs (Baldwin Park, Celebration, Isleworth) require gates to match specific design standards. If a welded repair needs to be ground smooth and painted to match, that adds finishing time. We handle that, but you should know it’s in the estimate.

How Much Does Gate Welding Cost Per Hour in Orlando?

Most mobile gate welders in Orlando charge $95 to $150 per hour with a one-hour minimum. That typically includes setup, welding, grinding, and cleanup. The reason you don’t see pure hourly pricing on the table above is that we quote by the job, not the hour. You know the total before the welder starts. No clock-watching, no surprise extra hours.

That said, some jobs genuinely are small. A hinge bracket that cracked at the weld point might take 30 minutes. In those cases the job price lands in the $165 to $210 range, which works out to roughly what you’d pay a standalone welder for the call-out plus labor, except you’re getting a warranty and a written invoice.

Common Gate Parts That Fail in Orlando

These are the parts we replace most in this market, and what they cost.

• Gate hinges. The bottom hinge takes the entire gate’s weight and sits closest to sprinkler heads and stormwater splash. We replace more bottom hinges in Orlando than any other single part. $120 to $260 per pair installed.
• Cantilever wheels and rollers. Rolling gates depend on wheel bearings, and bearings don’t love rainy season. A worn bearing makes the gate grind and jump. $95 to $210 per wheel assembly.
• Gate motor (the box that slides or swings your gate automatically). This is the part that wires directly to your opener and does the heavy lifting. In Orlando’s heat, motors work harder and fail earlier than they would in cooler climates. $580 to $1,100 installed.
• Control boards. These are the brains of the gate opener. Lightning storms in July and August are a real killer here, especially for gates in open areas like Lake Nona and Hunter’s Creek. $240 to $480 installed.
• Keypads and receivers. The weatherproof keypad mounted outside the gate experiences direct sun and rain year-round. $110 to $240 installed and programmed.
• Weld points on the frame. The original welds on many Orlando gates simply weren’t made for 20 years of humidity and heat cycles. Splits and cracks at the corner joints are common. $165 to $540 depending on how many welds need to be re-done.

How the Repair Process Works

This is how it goes when you call Warden Gate Repair Orlando, step by step. We made it simple because a gate repair shouldn’t require reading a manual.

1. Call (321) 465-7089. You get a live person, day or night. Tell us what the gate is doing (or not doing). We’ll ask a few quick questions about the gate type and the symptoms.
2. Schedule the visit. We’ll give you a window, and before the technician arrives, you’ll receive their name and photo by text or email. They wear a photo ID badge and will show it at the door. This is our Threshold Standard, and it applies to every visit, no exceptions.
3. Diagnosis. The technician inspects the gate, motor, hinges, and frame. If welding is needed, they’ll identify exactly where and why. This takes 30 to 60 minutes depending on the gate.
4. Written price. You get the total cost in writing before any work begins. No estimate range. No “we’ll see how it goes.” A specific dollar figure covering parts, labor, welding, and cleanup.
5. Repair. If you approve, the technician fixes the gate that day in most cases. For bigger structural welding jobs, we may schedule a follow-up with the welder, but we’ll tell you that up front.
6. 365-Day Done Right Promise. Every repair is guaranteed in writing for a full year. If the repair fails, we come back and fix it at no charge. That’s the whole promise, and it’s on every invoice.

How to Save on Gate Parts & Welding in Orlando

The most expensive gate repair is the one that gets ignored. A worn hinge leaves all the weight on the other hinge, which bends the frame, which cracks the welds, which strains the motor. A $180 hinge replacement in January becomes a $1,100 motor and frame repair by August. We see this pattern all over Orlando, from Winter Garden to Azalea Park.

So here is the practical way to save:

• Address small problems when they’re small. A squeaking hinge, a gate dragging on the ground, or a motor that hesitates are early warnings. Fixing them early is consistently cheaper.
• Ask for a written assessment before replacing a motor. Some companies default to motor replacement because it’s the higher-ticket solution. We don’t. If a $260 control board fixes your Viking opener, we tell you that. The free estimate call is (321) 465-7089.
• Protect the gate from sprinkler overspray. Orlando sprinkler systems are the leading cause of premature gate rust we see. Adjusting sprinkler heads so they don’t hit the gate frame costs nothing and adds years to the steel. It’s free advice we give on nearly every visit.
• Choose the right motor for your gate type. A heavy steel gate needs a motor rated for it. Installing an underpowered motor to save money up front means you’ll replace it in two years. Buy correctly once.
• Regular maintenance is real. We don’t sell maintenance contracts, but a periodic hinge lubrication and bolt check catches most failures before they become repairs. If you’re not sure what to check, ask the technician during any visit. It takes one minute to show you.

What Does a Gate Motor Cost in Orlando?

A new gate motor in Orlando runs $580 to $1,100 installed for residential gates, depending on brand and gate type. A LiftMaster LA400 swing gate motor installed typically falls in the $700 to $900 range. A Mighty Mule or Ghost Controls motor for a lighter gate can land closer to $580 to $750. FAAC and BFT hydraulic or electromechanical models trend toward the $850 to $1,100 end because of the parts cost and setup complexity.

The motor price includes removal of the old unit, mounting the new one, wiring, safety sensor alignment, and a full test cycle. You get a written price before any of that starts, and the repair is covered by the 365-Day Done Right Promise.

Is It Cheaper to Repair or Replace a Gate in Orlando?

For the gate itself, repair is almost always cheaper than replacement. A welded frame repair runs in the $390 to $800 range for most Orlando gates, while a full custom steel gate replacement starts around $2,000 and goes up from there. Unless the gate is rusted through in multiple sections or the original frame was underbuilt for its size, welding is the smarter money.

For the motor, the math changes. If the motor is more than 10 years old and the control board has also failed, repair costs start approaching replacement costs. A $480 board plus a $300 motor repair plus labor can hit $800, at which point a new motor with a full warranty is the better decision. We’ll walk you through the numbers honestly, because our reputation depends on you not being surprised later.

This applies to all the home gate systems we service around Orlando, and you can see our specific parts and welding service at Gate Parts & Welding in Orlando.

Why Weld When You Can Bolt?

This is a fair question, and the answer depends on the gate’s design. Bolt-on brackets work for lightweight aluminum gates and some residential swing gates. They’re faster and cheaper. But for heavy steel gates, welded connections carry load better, resist loosening, and last longer in Orlando’s heat-cycle conditions.

Bolts on a heavy gate will work loose over time, especially with daily use and temperature swings. A welded bracket becomes part of the gate’s structure. The tradeoff is cost: bolt-on hardware is typically 20 to 30% cheaper than welded work on the same repair. We’ll show you both options when both are viable, with written prices for each. You decide.

FAQs – Gate Parts & Welding Cost in Orlando

How much does a gate hinge replacement cost in Orlando?

A gate hinge replacement in Orlando typically costs $120 to $260 for a pair installed. If the old hinge has damaged the gate frame where it was mounted, welding reinforcement may be needed, which is quoted separately before work begins. Call (321) 465-7089 for an exact quote, and we’ll give you the written price before anything is installed.

Can you weld an aluminum gate in Orlando?

Yes, aluminum gate welding in Orlando runs around $165 to $390 for typical cracks or broken welds. Aluminum requires different equipment and more prep than steel (cleaning, pre-heating, and often a TIG weld), so it’s priced slightly higher per weld point. We’ll tell you during the estimate whether aluminum welding is the right fix or whether a replacement part makes more sense.

How much to replace a gate opener’s control board in Orlando?

A gate opener control board replacement in Orlando typically costs $240 to $480 installed for most brands, including LiftMaster, FAAC, Viking, and DoorKing. Board replacement includes wiring verification and safety sensor testing to make sure the new board isn’t receiving a fault from a bad component. We service all nine brands we carry, and the written price covers the whole job.

How much does a full gate frame welding job cost?

Full gate frame welding and structural reinforcement in Orlando runs $390 to $1,400 depending on gate size, steel thickness, and the extent of rust damage. A complete frame rebuild for a 16-foot steel swing gate is at the higher end. Every welding job includes rust treatment, grinding clean, primer, and paint to match the gate where possible, and every weld is covered by our 365-Day Done Right Promise.

Can you come today for a gate welding emergency in Orlando?

Yes. Our phone lines are answered by a live person 24/7, and we dispatch technicians across Orlando every day including weekends. If a gate is stuck open and your property is unsecured, we prioritize that call. Emergency diagnostic visits run $65 to $95, and you’ll get the repair price in writing before we touch anything. Call (321) 465-7089 now and a real person will get you scheduled.

Pricing reflects the Orlando market as of 2026. Warden Gate Repair Orlando offers free estimates – call (321) 465-7089.

Written by Cole Rafferty, Owner at Warden Gate Repair Orlando, serving Orlando since 2008.